Demo pawn

Setup sheet · 2026-11-20 20:50 · Demo Pawn.tap

Job

Machine
PRO6060 (5 × 5 ft), Avid Mach4, VFD spindle, Manual (M6)
Material
Poplar rotary blank: round, 1.750 in diameter, 6.000 in long
XY zero
X at the left end of the blank, Y on the rotation axis centreline
Z zero
On the rotation axis (Avid: Rotary tab ▸ Z Axis Touch), not the top of the blank
Rotary
Turns on A between faces, with the tool at safe Z. A also turns while the tool cuts the toolpaths marked “all round”. Raise the tool clear of the chuck and tailstock before starting.
Safe Z
0.500 in above the top face (1.375 in from the axis)
G-code units
Inches (G20)
Run time
About 22:08
Cutting extents
X 0.750 in to 5.250 in, Y 0.000 in to 1459.295 in, Z 0.157 in to 0.975 in (work coordinates)

Tools

#ToolTypeDiameterCutting lengthStick-out
1T1 1/4" Upcut End MillEnd Mill0.250 in1.000 in1.500 in
2T7 1/4" Ball NoseBall Nose0.250 in0.750 in1.250 in

Run order

#ToolpathToolAngleRPMFeedDepthTime
Load T1 1/4" Upcut End Mill and zero Z on the rotation axis before starting.
1Round to 1.55"T1all round1300075 in/min0.100 in3:10
Change to T7 1/4" Ball Nose and re-zero Z on the rotation axis, then press Cycle Start.
2Finish pawnT7all round1500070 in/min0.718 in17:55

3D rotary

Checks