Desk tidy
Setup sheet · 2026-11-20 22:16 · Desk Tidy.tap
Job
- Machine
- PRO6060 (5 × 5 ft), Avid Mach4, VFD spindle, Manual (M6)
- Material
- Baltic birch plywood: 10.000 in × 6.000 in × 0.750 in
- XY zero
- Lower left of the material
- Z zero
- Material top
- Safe Z
- 0.500 in above the material
- G-code units
- Inches (G20)
- Run time
- About 2:24
- Cutting extents
- X 0.375 in to 9.625 in, Y 0.375 in to 5.625 in, Z -0.770 in to 0.100 in (work coordinates)
Tools
| # | Tool | Type | Diameter | Cutting length | Stick-out |
| 1 | T1 1/4" Upcut End Mill | End Mill | 0.250 in | 1.000 in | 1.500 in |
Run order
| # | Toolpath | Tool | RPM | Feed | Depth | Time |
| Load T1 1/4" Upcut End Mill and zero Z (material top) before starting. |
| 1 | Rough recess | T1 | 13000 | 154–220 in/min * | 0.375 in | 0:58 |
| 2 | Finish recess walls | T1 | 13000 | 154–220 in/min * | 0.375 in | 0:08 |
| 3 | Well | T1 | 13000 | 154–220 in/min * | 0.500 in | 0:33 |
| 4 | Cut out | T1 | 13000 | 220 in/min | 0.770 in | 0:43 |
* Adjust feeds for load: the feed slows in full-width cuts, inside corners and tight inside arcs, and runs at the higher feed elsewhere.