| # | Toolpath | Tool | RPM | Feed | Depth | Time |
| Load T1 1/4" Upcut End Mill and zero Z (material top) before starting. |
| 1 | Pen tray – clearing | T1 | 13000 | 220 in/min | 0.500 in | 1:13 |
| 2 | Phone recess – clearing | T1 | 13000 | 220 in/min | 0.375 in | 1:13 |
| 3 | Coin pocket – clearing | T1 | 13000 | 220 in/min | 0.375 in | 0:20 |
| Change to T2 1/8" Upcut End Mill and re-zero Z with the touch plate, then press Cycle Start. |
| 4 | Pen tray | T2 | 18000 | 120 in/min | 0.500 in | 1:25 |
| 5 | Phone recess | T2 | 18000 | 120 in/min | 0.375 in | 1:03 |
| 6 | Coin pocket | T2 | 18000 | 120 in/min | 0.375 in | 0:28 |
| 7 | Pen holes | T2 | 18000 | 120 in/min | 0.500 in | 1:13 |
| Change to T1 1/4" Upcut End Mill and re-zero Z with the touch plate, then press Cycle Start. |
| 8 | Cut out tray | T1 | 13000 | 220 in/min | 0.770 in | 0:49 |