JOY Inlay

Setup sheet · 2026-11-20 08:44

Job

Machine
PRO6060 (5 × 5 ft), Avid Mach4, VFD spindle, Manual (M6)
Material
Hard maple: 7.000 in × 4.500 in × 0.750 in
XY zero
Lower left of the material
Z zero
Material top
Safe Z
0.500 in above the material
G-code units
Inches (G20)
Run time
About 4:52
Cutting extents
X 0.550 in to 6.450 in, Y 0.978 in to 3.522 in, Z -0.242 in to 0.100 in (work coordinates)

Tools

#ToolTypeDiameterCutting lengthStick-out
1T2 1/8" Upcut End MillEnd Mill0.125 in0.500 in1.000 in
2T5 60° V-Bit 1/2"V-Bit 60°0.500 in0.433 in0.933 in

Run order

#ToolpathToolRPMFeedDepthTime
Load T2 1/8" Upcut End Mill and zero Z (material top) before starting.
1Inlay plug – flat clearingT218000120 in/min0.242 in3:06
Change to T5 60° V-Bit 1/2" and re-zero Z with the touch plate, then press Cycle Start.
2Inlay plugT51800080 in/min0.242 in0:45

Inlay