(Hand-written test file: tapped and bored plate, Mach4, inches) (Zero: lower left corner, top of a 6 x 4 x 1/2 in plate) G90 G94 G17 G20 G80 G98 (T2 1/8 in end mill: pilot holes) T2 M6 S18000 M3 G0 Z0.5 G0 X1.0 Y1.0 G81 X1.0 Y1.0 Z-0.45 R0.1 F15 X5.0 Y1.0 X5.0 Y3.0 X1.0 Y3.0 G81 X3.0 Y2.0 Z-0.55 R0.1 F15 G80 G0 Z0.5 M5 (T1 stands in for a 1/4-20 tap: 20 threads per inch at 500 RPM = 25 in/min) T1 M6 S500 M3 G0 X1.0 Y1.0 G84 X1.0 Y1.0 Z-0.4 R0.1 F25 X5.0 Y1.0 X5.0 Y3.0 X1.0 Y3.0 G80 G0 Z0.5 M5 (T3 stands in for a boring bar: fine bore the centre hole) T3 M6 S3000 M3 G0 X3.0 Y2.0 G76 X3.0 Y2.0 Z-0.55 R0.1 Q0.005 P0.5 F5 G80 G0 Z0.5 M5 G0 X0 Y0 M30